ASTM A179 U Bend Heat Exchanger Tube

Nkọwa dị mkpirikpi:

Mgbe U gbadaa (oyi na-akpụ), enwere ike ịchọ ọgwụgwọ okpomọkụ nke akụkụ na-ehulata.igwe na-emepụta nitrogen (iji chebe elu igwe anaghị agba nchara n'oge annealing).A na-achịkwa okpomọkụ site na mpaghara dum a na-agwọ okpomọkụ site na pyrometer infrared edoziri na obere ibu.


Nkọwa ngwaahịa

Mkpado ngwaahịa

U ekwe tube Standard na ihe onwunwe

● ASTM A179/ ASME SA179;

● ASTM A213/ ASME SA 213, T11, T22, T22, T5;

● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410;

● ASTM B111, C44300, C68700, C70600, C71500;

● ASTM B338, GR.1, GR.2.

● Alloys ego.

● Nikel Alloys.

● U Bend Dimension ike.

● tube OD.: 12.7mm-38.1mm.

● Ọkpụrụkpụ tube: 1.25mm-6mm.

● Na-ehulata Radius: Min.1.5 x OD/ Max.1250mm.

● U tube kwụ ọtọ “ụkwụ” Ogologo: Oke.12500 mm.

● tube kwụ ọtọ tupu U ehulata: Max.27000 mm.

Ngwa ngwaahịa

U Bend Tubes maka Ndị na-agbanwe Okpomọkụ etinyere nke ukwuu na mmanụ & gas, kemịkalụ & petrochemical osisi, refineries, ike osisi, mmeghari ume osisi.

Ihe na-enyochakarị

1. Ọgwụgwọ okpomọkụ na Ngwọta Ọkụnwụ / Na-egbuke egbuke

2. Ịcha ogologo oge achọrọ na deburring

3. Nyocha nyocha ihe mejupụtara kemịkalụ na 100% PMI na otu tube sitere na okpomọkụ ọ bụla site na Spectrometer Reading Direct

4. Nleba anya na Nnwale Endoscope maka Ule Ogo elu

5. 100% Hydrostatic Test/Pneumatic Test and 100% Eddy Current Test

6. Nnwale Ultrasonic dabere na MPS (Nkọwapụta ihe ịzụrụ ihe)

7. Mechanical Tests na-agụnye sension Test, Flattening Test, Flaring Test, hardness Test

8. Mmetụta Mmetụta dabere na arịrịọ ọkọlọtọ

9. Nnwale nha ọka na ule corrosion intergranular

10. Ultrasoic nha nke Wall ọkpụrụkpụ

11. Stress Relieve Annealing on U ehulata Parts mgbe ekwe

Ngosipụta ngwaahịa

2240900248

Ngwugwu Tubes igwe anaghị agba nchara U-Bend

'U' Bend igwe anaghị agba nchara Tubes na-arụpụtara na anyị osisi dị ka ndị ahịa chọrọ.Enwere ike gwọọ bends ọkụ dị ka ihe ndị ahịa chọrọ si na nnwale hydrostatic na nnwale penetrant na-esiji ma ọ bụrụ na achọrọ ya.

A na-eji tubes bent eme ihe n'ọtụtụ ebe na sistemu mgbanwe okpomọkụ.Akụrụngwa mgbanwe okpomọkụ na ndabere nke igwe anaghị agba nchara U-tube dị mkpa na strategically dị mkpa na ubi ubi nuklia na petrochemical ụlọ.

U-tube okpomọkụ e mere maka ngwa okpomọkụ dị elu, karịsịa mkpuchi uzuoku ma ọ bụ usoro mmanụ ọkụ.A na-ahọrọ ihe nlereanya a mgbe mgbasawanye dị iche na-eme ka onye na-agbanwe mpempe akwụkwọ tube adịghị mma yana mgbe ọnọdụ na-egbochi nhọrọ ụdị isi na-ese n'elu mmiri (HPF).

Ọnọdụ dị n'elu Emechara U-tube ga-abụ enweghị ọnụ ọgụgụ, na-enweghị ntucha mgbe agbajichara.

Nlele na nhazi nhazi

1. Nnwale hydrostatic dị elu: kacha nta: 10 Mpa-25Mpa.

2. Nnwale ikuku n'okpuru mmiri mgbe ọ gbasịrị

3. U-tube mgbidi ọkpụrụkpụ ule

4. Eddy ugbu a ule tupu U-ekpu ehulata kpụrụ

5. Ultrasonic ule tupu U-ekara ehulata kpụrụ

6. Ọgwụgwọ okpomọkụ nwere ike belata nrụgide

Nkọwa ndị ọzọ nke U Bend Tube

A. Bee ọkpọkọ niile n'ogologo ụkwụ a kapịrị ọnụ, ma jiri ikuku maka nhicha nke ime na nkwụsị.

B. Tupu nkwakọ ngwaahịa, a na-eji mkpuchi plastik kpuchie nsọtụ abụọ nke ikpere ụkwụ U.

C. Ihe nkesa kwụ ọtọ maka radius ọ bụla.

D. Igbe plywood ọ bụla nwere ndepụta nkwakọ ngwaahịa kpuchie na rọba iji kwado njirimara nke nkọwa usoro, gụnyere ndepụta ziri ezi nke radius n'ime na ogologo.

U Bend igwe anaghị agba nchara okpomọkụ Exchanger Tube, U Bent Pipe

Na-ehulata ọkpọkọ maka igwe ọkụ na ọkụ ọkụ

Na ike osisi Ọdịdị igbe mbukota site containers loading na mbupu.

Igwe na-ekpo ọkụ U TUBES nwere igwe anaghị agba nchara, ọkwa nchara alloy dị, ọkwa Carbon Steel dịkwa.

Oke oke maka tubing:OD: 1/4" (6.25mm) ruo 8" (203mm), WT 0.02" (0.5mm) ruo 0.5" (12mm).

Ogologo:30m (Max) ma ọ bụ dị ka gị chọrọ.

Usoro:Oyi adọtara, Oyi akpọrepu akpọrepu, Nkenke akpọrọ maka ọkpọkọ enweghị nkebi ma ọ bụ tube.

Mechaa:Annealed & pickled, annealing na-egbuke egbuke, na-egbu maramara.

Akwụsị:Ngwunye nwere agba ma ọ bụ nke dị larịị, ịkpụ square, enweghị ihe ọ bụla, okpu plastik na njedebe abụọ ahụ.

Ngwa:Igwe ọkụ, Onye na-agbanwe ọkụ, Condencer, Machining, Bearing Machining, API Service.


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya